Skip to product information
RFID Reader
  • RFID Reader
RFID Reader

Track One Solution

The RFID reader 1W-H0-04P MS reads identification data (UID) of transponders (cards, key fobs, etc.) contactlessly, compliant with ISO/IEC 14443-3-A (e.g. MIFARE cards), ISO/IEC 14443-3-B, ISO 15659, FeliCa, iClass, and ISO 18092 standards.

 Request a Quote
Details

The RFID reader 1W-H0-04P MS reads identification data (UID) of transponders (cards, key fobs, etc.) contactlessly, compliant with ISO/IEC 14443-3-A (e.g. MIFARE cards), ISO/IEC 14443-3-B, ISO 15659, FeliCa, iClass, and ISO 18092 standards.
The device has a built-in single-color LED that can be used freely. The red LED must not be used for signaling failures or hazardous conditions.
The LED is powered by an internal voltage regulator through a built-in resistor. The LED turns on when the appropriate LED pin is connected to the negative (ground) of the power supply.
Shipping & Returns

Product Specifications

TECHNICAL DATA
Power supply 5–30 V DC
Power supply capacity 1 A
Maximum current consumption 60 mA
Average receiver current 30 mA (without LED)
Peak receiver current 50 mA
Red LED current 7 mA
Frequency 13.56 MHz
Transponder type ISO/IEC 14443-3-A, ISO/IEC 14443-3-B, ISO 15693, Felica, iClass, ISO 18092
Antenna surface area 8.6 cm²
Reading distance Up to 7 cm, depending on the token
Reading frequency 2 times per second
Supported 1-Wire commands 0x33 (0x0F) – Read ROM; 0xF0 – Search ROM
Mounting method Gluing
Cable length 0.4 m (flat cable)
Operating temperature -20 °C to +55 °C
RoHS compliance Yes
ORDERING INFORMATION
Custom power supply option Products with alternative power supply voltages are available upon request
3.3 V DC variant Specify product name: 1W-H0-04P MS (3V3)

Related products

Shop by collection
LL301

Asset Tracking Devices